3.
Calling someone in your intercom group
About this task
If your system administrator has set up an intercom group, you can call anyone in that group by
pressing a few numbers.
Procedure
1. Before dialing, scroll right from the Phone screen to access the Features screen.
2. If necessary, scroll down to Dial Icom and press OK or just press the corresponding line
button.
The intercom group number shows next to the Dial Intercom feature and the next denotes
the extension your administrator has predefined as your automatic intercom destination
extension.
3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Handling Conference
Using the conference feature
You can use conference calls to speak with people from different locations on the same call.
Additional conferencing options might be available through Expanded Meet-Me Conferencing.
Contact your administrator for more information about this feature.
Adding a person to an active call
About this task
You can add participants to an active call to set up a conference call.
Before you begin
Start a call.
Operation
October 2019 Using Avaya 9601 IP Deskphone SIP 44
Comments on this document? infodev@avaya.com
To Next Page
Loading...
