If you enabled the DND affects SAC option, the phone activates the SAC feature when you
manually change the presence status to DND.
Note:
Do not enable the SAC feature in case you selected the cover all option for the coverage path.
Enabling both features at the same time can cause duplicate entries in the call log.
Procedure
1. Navigate to the Features screen.
2. Scroll to choose Send All Calls.
3. Press Select or OK or the corresponding line button to activate the feature.
Activating call forwarding
About this task
Use this task to forward your calls to a specified number.
Procedure
1. Gain access to the Features screen.
2. Press Select or the corresponding line button.
3. Enter the destination number to which you want to forward your calls.
4. Press #.
Note:
You can view the call originator when the call forwarding chain has two or more
participants. This feature works if your administrator has configured the related
parameter.
Disabling call forwarding
About this task
Use this task to turn off any call forwarding feature that you activated.
Procedure
1. Press the right navigation button to gain access to the Features screen.
2. Select the active call forwarding feature that you want to turn off.
3. Press OK .
Using bridged call appearances
In addition to your own call appearances, your phone might show one or more bridged call
appearances on the display screen. A bridged call appearance is of another user and enables you
to determine if that call appearance is in use, answer calls on that appearance, or join a call in
Customization
October 2019 Using Avaya 9601 IP Deskphone SIP 72
Comments on this document? infodev@avaya.com
To Next Page
Loading...
