DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
30 of 51
SM6-1_CMES
4.9. Define Application Sequence
The second step in defining an Application to support non-IMS SIP Users registered to Session
Manager is to define an Application Sequence.
Navigate to Elements Session Manager Application Configuration Application
Sequences from the left navigation menu.
Click New (not shown). In the Sequence Name section, enter the following values.
Name Enter name for the application.
Description Enter description [Optional].
In the Available Applications table, click icon associated with the Application for
Communication Manager Evolution Server defined in Section 4.8 to select this application.
Verify a new entry is added to the Applications in this Sequence table as shown below.
Note: The Application Sequence defined for Communication Manager Evolution Server must
only contain a single Application.
Click Commit to save the new Application Sequence.
To Next Page
Loading...
