Avaya 9600 Series - Chapter 5: Making Calls; Making a Call

DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
31 of 51
SM6-1_CMES
4.10. Add SIP Users
Add new SIP users for each 9600 Series SIP station defined in Section 3.11. Alternatively, use
the option in Step 5 below to automatically generate the station after adding a new SIP user.
To add new SIP users, expand Users  User Management and select Manage Users from left
navigation menu.
Note: to support failover, each SIP user was defined with multiple SIP Registrations.
Step 1: Click New (not shown). Enter values for the following required attributes for a new SIP
user in the Identity section and use default values for remaining fields.
 Last Name: Enter last name of user.
 First Name: Enter first name of user.
 Login Name: Enter “extension number@<domain>” where “<domain>”
matches the domain defined in Section 4.1.
 Authentication Type: Verify “Basic” is selected.
 Password: Enter password used to log into System Manager.
 Confirm Password: Repeat value entered above.
 Localized Display Name: Enter display name for user [Optional].
The screen below shows results from Step 1 for a new SIP user.