DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
40 of 51
SM6-1_CMES
Step 4: On the SIP Settings menu, highlight SIP Proxy Settings (not shown) and press Select.
Select NEW (not shown).
Enter the following information for the primary Session Manager.
SIP Proxy Server: Enter IP Address of SIP signaling interface for Session Manager.
Transport Type: Select “TCP”.
SIP Port: Enter “5060”.
The screen below shows the results from Step 4 for the sample configuration.
Step 5: Press Save. Repeat the above step to enter the information for the second Session
Manager.
Step 6: Press Save to save the information for the second Session Manager. Press Back two
times to return to the main Admin Procedures menu.
Step 7: Press Exit to complete the configuration. The phone will reboot.
To Next Page
Loading...
