Avaya 9600 Series - Page 4

RDC; Reviewed:
SPOC 2/1/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
4 of 14
CII_IP_Pager
Avaya
9600 Series IP Deskphone
Avaya One-X
Deskphone
Edition S3.103s
GA November 2011
Avaya
Avaya Aura
®
Communication Manager
6.0
GA October 2011
Avaya
IP Office 500V2
8.0
GA December 2011
Computer Instruments
e-IVR IP Phone Pager
2.0
GA March 2011
5. Configure Avaya 9600 IP Phones
This section describes the IP Phone configuration to support the network shown in Figure 1.
The configuration of the IP Phone can be done manually or through DHCP. The compliance
testing used DHCP to assign the IP Phone with the IP address of the IP Phone Pager application.
During the installation of the IP Pager application the IP Phone’s home page is set by modifying
the “WMLHOME” parameter in the 46xxsettings.txt file. Additionally the “SUBSCRIBELIST”
and “TPSLIST” parameter are set so the phone can register with the IP Pager application.
Please refer to http://instruments.com/support/index.html for more detailed information.
Parameters added to 46xxsettings.txt file for compliance testing.
SET WMLHOME http://10.64.51.197/webpager/ippager.aspx?wci=page
SET SUBSCRIBELIST http://10.64.51.197/webpager/ippager.aspx?wci=page
SET TPSLIST 10.64.51.197
6. Configure e-IVR IP Phone Pager
 Login to IP Phone Pager
 Verify Phone Registration with IP Phone Pager application.
 Create Groups
6.1. Login to IP Phone Pager
From a Windows Internet Explorer Web Browser enter the URL of the IP Phone Pager
Application.
http://<location of IP phone Pager Application>/webpager/
In the compliance testing the application was running at http://10.64.51.197/webpager/
Log in using the appropriate credentials.