• If the parameter is present in the downloaded 46xxsettings.txt file, the phone uses the
parameter value specified in the file.
Parameter name Default value Description and value range
ADMIN_HSEQUAL 1 Handset Equalization alternative permission flag. Valid
values are:
1 = Use handset equalization that is optimized for
acoustic TIA 810/920 performance.
2 = Use handset equalization that is optimized for
electrical FCC Part 68 HAC telecoil performance.
Note:
This parameter will only have an effect on a phone if
the handset equalization has not been set by the
user or by the HSEQUAL local procedure.
AGCHAND 1 Automatic Gain Control status for handset, 0=disabled,
1=enabled.
Note:
This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/
restore file as OPTAGCHAND, if BRURI has a valid
value. The value of the OPTAGCHAND parameter in the
backup/restore file takes precedence over the AGCHAND
parameter. User can use the Clear operation to reset the
configuration.
AGCHEAD 1 Automatic Gain Control status for headset, 0=disabled,
1=enabled.
Note:
This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/
restore file as OPTAGCHEAD, if BRURI has a valid
value. The value of the OPTAGCHEAD parameter in the
backup/restore file takes precedence over the AGCHEAD
parameter. User can use the Clear operation to reset the
configuration.
AGCSPKR 1 Automatic Gain Control status for Speaker, 0=disabled,
1=enabled.
Note:
This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 72
Comments on this document? infodev@avaya.com
To Next Page
Loading...
