Avaya 9600 Series - Making a Call from Your Call Log; Viewing Call Details

Parameter name Default value Description and value range
SSH_LOCKOUT_ATTEMPT
S
0 Specifies the number of failed login attempts after which
SSH will be disabled. Valid values are 1 to 5 ASCII
numeric digits, zero through 32767.
SSH_LOGIN_DELAY 60 Specifies the number of seconds of delay between login
attempts if three or more attempts fail. Valid values are 1
to 5 ASCII numeric digits, zero through 32767.
SSH_USERNAME “craft” Specifies the user name to be used for SSH logins. Valid
values are 0 to 255 ASCII characters.
SSO_ENABLED 0 Specifies whether Single Sign (SSO) on capability is
enabled or disabled. Valid values are:
0= Default , SSO disabled. 1=SSO enabled.
SSO_CLIENT_CERT 0 Specifies whether the telephone will request and
authenticate an identity certificate from the desktop
computer during the TLS handshake for SSO. Valid
values are:
0= Default value, specifies that the telephone will not
request a certificate from the desktop computer. 1= the
telephone will request and authenticate an identity
certificate from the desktop computer during the TLS
handshake.
SSO_DISCONNECT_ACTI
ON
1 Specifies what the telephone does if the link is lost on the
secondary (PC) Ethernet interface while it is registered
with credentials that were provided by, or that are the
same as those provided by, an SSO Register command.
Valid values are:
1= Default, the telephone invokes each FAC contained in
the value of SSO_DISCONNECT_FACS and then
unregisters. 2 = The telephone locks up. 3 = The
telephone remains active.
Note:
If the SSO TCP connection is terminated but the link
is not lost, no action is taken based on this
parameter.
SSO_DISCONNECT_FACS “null string” Specifies a list of Feature Access Codes (FACs) to be
activated before the deskphone unregisters due to loss of
the SSO-LD link.
SSO_LOCK_SYNC 1 Specifies what the telephone does if the telephone
receives a Lock or Unlock command from the SSO
application. Valid values are:
1= Default, the telephone attempts to run the LOCK
command. 0 = the telephone ignores the LOCK
command.
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 98
Comments on this document? infodev@avaya.com