9600 Series IP Deskphones installation
22 SIP Deskphones Release 6.4 Installation and Maintenance Guide
This document describes the installation and post-installation maintenance issues of these IP
deskphones. For details about using deskphone features, see the user documentation for each
deskphone.
Software
The 9608, 9608G, 9611G, 9621G, and 9641G IP deskphones are set to use the H.323 protocol
by default. To run the deskphones in a SIP environment, you must convert the deskphones to
SIP settings. Further, a factory-shipped IP Deskphone may not contain the most up-to-date
software for registration and SIP operation. When you connect the deskphone to your network,
the deskphone connects to an HTTP server and searches for the latest software bundle
available. You must download the latest SIP software bundle for deskphones to be converted to
SIP, then set the SIG parameter as applicable to convert applicable deskphones to run SIP
software, as described in
Converting software on the 9608, 9608G, 9611G, 9621G, or 9641G IP
deskphones on page 24.
For subsequent downloads of software upgrades, Avaya Aura
®
Session Manager provides the
capability for a remote restart of the deskphone.
Session Manager, Communication Manager, and
Secondary Gateway configurations
SIP software release 6.2 is compatible with release 6.0 of Avaya Aura
®
Communication
Manager and Avaya Aura
®
Session Manager. This release supports the following certified
secondary gateways:
● Avaya Secure Router 2330 and 4134
● Branch Session Manager
● Audiocodes MP-series analog and BRI gateways
● Cisco 2811 ISR
● Juniper SRX 210 and 240
● I55
● Teldat Vyda gateway
To Next Page
Loading...
