Configuring SIP settings
Issue 5 August 2014 59
Note:
Note: The SIG value “Default” can represent either SIP or H.323 depending on the
upgrade file used for the deskphone.
3. To change the setting, press the Change softkey until you see the setting you want or use
the Right or Left navigation arrow to cycle through the settings.
Depending on the current value, the next sequential text string is selected and displayed as
the setting. For example, if the current value is SIP (2), pressing the Right arrow changes
the value to 0 (default). If the current value is H.323 (1), pressing Right arrow changes the
value to 2 (SIP).
4. Press Save to store the new setting and redisplay the Admin Procedures screen.
The remainder of this procedure depends on the status of the boot and application files.
Configuring SIP settings
Use this procedure to set up SIP-related settings like identifying the SIP Proxy Server.
1. Use the Craft password to gain access to the Admin Procedures screen. The default
password is 27238.
2. When you select SIP from the Admin Procedures screen, the deskphone displays two
choices - SIP Global Settings or SIP Proxy Server.
3. To change any of the SIP Global Settings, press Select or OK or the corresponding line
button and proceed to the next step. To change the SIP Proxy Server(s), scroll down and
press Select or OK or the corresponding line button and proceed instead to Step 4.
To Next Page
Loading...
