Parameter Type Default
value
Description
intervening spaces. The range is 0 to 255 ASCII
characters including commas.
DOMAIN String Null Specifies a text string that contains the domain name
to be used when DNS names in parameter values
are resolved into IP addresses. The range is 0 to 255
ASCII characters.
FILE_SERVER_URL String Null Specifies the configured file server URLs for
downloading firmware and configuration files.
If this parameter is set, then the following parameters
are ignored:
• HTTPSRVR
• HTTPPORT
• HTTPDIR
• TLSSRVR
• TLSSRVRDIR
• TLSPORT
HTTPSRVR String 0.0.0.0 Specifies a list of IP or DNS addresses of the HTTP
servers for downloading settings file, language files,
and firmware during startup procedure.
HTTP server addresses can be in dotted decimal or
DNS format, and must be separated by commas.
The range is from 0 to 255 ASCII characters
including commas.
HTTPDIR String Null Specifies the path to prepend to all configurations
and data files that the device might request when
starting up. The path is relative to the root of the
HTTP file server and to the directory in which the
configuration and date files are stored. The path can
contain no more than 127 characters and must not
contain spaces.
If an Avaya file server is used to download
configuration files over HTTPS, but a different server
is used to download software files through HTTP, set
the path of the Avaya server in the DHCP site-
specific option, and set HTTPDIR again in the
46xxsettings.txt file with the appropriate path for the
second server. HTTPDIR is the path for all HTTP
operations.
In configurations where the upgrade and binary files
are in the default directory on the HTTP server, do
not use the HTTPDIR=<path>.
Table continues…
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 35
Comments on this document? infodev@avaya.com
To Next Page
Loading...
