Parameter Type Default
value
Description
LOGSRVR String Null Specifies the IP or DNS addresses for the Syslog
server. The range is from 0 to 255 characters.
RTCPMON String Null Specifies the IP or DNS address for the RTCP
monitor. You can set this parameter only if the
environment is not an Avaya environment. The range
is from 0 to 255 characters.
RTCPMONPORT Numeric 5005 Specifies the RTCP monitor port number. You can
set this parameter only if the environment is not an
Avaya environment. The range is from 0 to 65535.
EXCHANGE_SERVER_LIST String Null Specifies a list of IP or DNS addresses for the
Microsoft Exchange
™
server. The range is from 0 to
255 characters.
CONFERENCE_FACTORY_U
RI
String Null Specifies the conference server URI used to start an
Avaya Aura
®
Conferencing conference call.
SIGNAL_P_CONFERENCE_S
IP_HEADER
Integer 1 Specifies whether to enable P-Conference header in
SIP 200 OK message sent to the AAC conferencing
server. Assign one of the following values:
• 1: P-Conference header will be sent
• 0: P-Conference header will not be sent
P_CONF_OUTDIAL_PROMPT Integer 0 Specifies whether the value of P-Conference header
should contain true or false for “OutdialPrompt=”.
Assign one of the following values:
• 1: P-Conference header should contain true for
“OutdialPrompt=”
• 0: P-Conference header should contain false for
“OutdialPrompt=”
P_CONF_FEEDBACK_PROM
PTS
Integer 0 Specifies whether the value of P-Conference header
should contain true or false for “FeedbackPrompts=”.
Assign one of the following values:
• 1:P-Conference header should contain true for
“FeedbackPrompts =”
• 0: P-Conference header should contain false for
“FeedbackPrompts =”.
Configuration through the settings file
38 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
