Protocol-specific parameters
SIP
Parameter Type Default
value
Description
SUBSCRIBE_SECURITY Integer 2 Specifies the use of SIP and SIPS subscriptions. The
range is 0 to 2.
ENABLE_AVAYA_ENVIRONM
ENT
Integer 1 Specifies the SIP operational mode. Assign one of
the following values:
• 0: Operates in a mode to comply with the third-
party standard SIP proxy provisioning SIPPING 19
features.
• 1: Operates in Avaya environment mode
provisioning SIP and AST features and using PPM
to download, back up, and restore operations.
DISCOVER_AVAYA_ENVIRO
NMENT
Integer 1 Specifies whether the device discovers that it is in an
Avaya environment where SIP AST features are
supported. Assign one of the following values:
• 0: Do not auto discover AST support.
• 1: Auto discover AST support. The SIP proxy
server might not support AST.
CONFIG_SERVER_SECURE
_MODE
Integer 1 Specifies the communication mode for configuration
server, that is, whether secure communication
through HTTPS is required to access the
configuration server. Assign one of the following
values:
• 0: Use HTTP.
• 1: Use HTTPS.
• 2: Use HTTPS if the SIP transport type is TLS,
otherwise use HTTP.
ENABLE_EARLY_MEDIA Integer 1 Specifies whether to enable early media. Assign one
of the following values:
• 0: Disabled
• 1: Enabled
RDS_INITIAL_RETRY_ATTE
MPTS
Integer 15 Specifies Remote Data Source initial retry attempts.
The value indicates the number of times the PPM
adaptor tries to download from PPM before giving up
the PPM server connection. The range is from 1 to
30.
Table continues…
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 39
Comments on this document? infodev@avaya.com
To Next Page
Loading...
