Avaya 9601 - Dial Plan Parameters

TLS
Parameter Type Default
value
Description
TLSSRVRID Integer 1 Specifies whether the TLS server identification is
required. Assign one of the following values:
• 0: No certificate match necessary. TLS connection
will be established.
• 1: Certificate match required. TLS connection will
only be established if the server's identity matches
the server's certificate.
LLDP
Parameter Type Default
value
Description
LLDP_ENABLED Integer 2 Specifies whether to enable LLDP. Assign one of the
following values:
• 0: Disabled.
• 1: Enabled.
• 2: Enabled, but only begin transmitting if an LLDP
frame is received.
Dial plan parameters
Parameter
Type Default
value
Description
DIALPLAN String Null Specifies one or more valid dial strings. The range is
0 to 1023 characters.
PHNCC String 1 Specifies the dial plan country code.
PHNDPLENGTH Numeric 5 Specifies the dial plan internal extension length. The
range is from 3 to 13.
PHNIC String 011 Specifies the dial plan international access code.
PHNLD String 1 Specifies the dial plan long distance access code.
PHNLDLENGTH Numeric 10 Specifies the dial plan national telephone number
length. The range is from 5 to 15.
PHNOL String 9 Specifies the dial plan public network access code.
PHNEMERGNUM String Null Specifies the emergency number.
ENABLE_REMOVE_PSTN_A
CCESS_PREFIX
Numeric 0 Specifies whether to enable the removal of the PSTN
access prefix. Assign 0 or 1.
Table continues…
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 45
Comments on this document? infodev@avaya.com