Parameter Type Default
value
Description
SLMCAP Integer 0 Specifies whether the SLA Mon
™
agent supports
packet capture. Assign one of the following values:
• 0: Disabled.
• 1: Enabled but without RTP payloads.
• 2: Enabled with RTP payloads.
• 3: Disabled with RTP payloads from the CRAFT
menu.
SLMCTRL Integer 0 Specifies whether the SLA Mon
™
agent supports
device control. Assign one of the following values:
• 0: Disabled.
• 1: Enabled.
• 2: Disabled. The feature is enabled from the
CRAFT menu.
SLMPERF Integer 0 Specifies whether the SLA Mon
™
agent supports
performance monitoring.
• 0: Disabled
• 1: Enabled
SLMPORT Integer 50011 Specifies the UDP port used to receive commands
from the SLA Mon
™
server. The allowed range of
values are between 6000 and 65535.
SLMSRVR Integer 0.0.0.0:0 Specifies the source IP address and, optionally, the
source port number of valid discovery messages
from an SLA Mon
™
server.
SLMSTAT Integer 0 Specifies whether the SLA Mon
™
agent will be
enabled. Assign one of the following values:
• 0: Disabled
• 1: Enabled
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 49
Comments on this document? infodev@avaya.com
To Next Page
Loading...
