Avaya 9601 - Upgrade Related Parameters

Upgrade related parameters
Upgrade related parameters
Parameter Type Default
value
Description
UPGRADE_POLLING_PERIO
D
Integer 60 Specifies the polling interval in minutes between
polling both firmware and settings file. The range is
from 0 to 10080. Assign one of the following values:
• 0: Disabled
• 1–10080: Enabled
UPGRADE_DLOAD_START String Null Specifies the start time at which phone tries to
download the firmware file. The format is Dddhh.
UPGRADE_DLOAD_END String Null Specifies the end time at which phone stop tries to
download new firmware file.
UPGRADE_INSTALL_DATE_
TIME
String 1970-01-
01T00:0
0
Specifies the date and time after which new firmware
and settings file are installed.
UPGRADE_POLICY Integer 2 Specifies whether the firmware and settings files
update is done after reset only, reset and policy
configuration parameters, or policy only. Assign one
of the following values:
• 0: Update of firmware and settings files after reset
only.
• 1: Update of firmware and settings files according
to the policy rules. Reset does not trigger new
update of firmware and settings files.
• 2: Update upgrade/settings files and firmware after
any reset and policy rules.
DLOAD_RND_AFTER_RESE
T
Integer 0 Specifies the interval in seconds over which
downloading attempts is randomized after reboot.
Assign one of the following values:
• 0: No randomization.
• 1–32767: Randomization.
DLOAD_RND Integer 3600 Specifies the interval in seconds over which
downloading attempts is randomized during
background downloads. Assign one of the following
values:
• 0: No randomization.
• 1–32767: Randomization.
Configuration through the settings file
50 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com