Avaya 9601 - Ethernet Parameters

Parameter Type Default
value
Description
GRATARP Integer 0 Specifies whether an existing ARP cache entry is
updated with a MAC address received in a gratuitous
ARP message. Assign one of the following values:
• 0: Gratuitous ARP messages will be ignored.
• 1: Gratuitous ARP messages will be processed to
update an existing ARP cache entry.
IPADD String 0.0.0.0 Specifies the IP address of the telephone. The range
is from 7 to 15 ASCII characters. This is a testable
parameter.
Ethernet parameters
Parameter Type Default
value
Description
PHY1STAT Numeric 1 Specifies the speed and duplex mode of Ethernet
line interface. Assign one of the following values:
• 1: Auto negotiation speed and duplex.
• 2: 10Mbps half-duplex operation.
• 3: 10Mbps full-duplex operation.
• 4: 100Mbps half-duplex operation.
• 5: 100Mbps full-duplex operation.
PHY2STAT Numeric 1 Specifies the speed and duplex mode of the
secondary Ethernet line interface or disables the
secondary Ethernet line interface. Assign one of the
following values:
• 0: Disabled.
• 1: Auto negotiation speed and duplex.
• 2: 10Mbps half-duplex operation.
• 3: 10Mbps full-duplex operation.
• 4: 100Mbps half-duplex operation.
• 5: 100Mbps full-duplex operation.
PHY2TAGS Numeric 0 Specifies whether tags are stripped from frames
forwarded to PHY2. Assign one of the following
values:
• 0: Remove tags from frames forwarded to PHY2.
Table continues…
Configuration through the settings file
60 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com