Avaya 9601 - Qos Parameters

Parameter Type Default
value
Description
• 1: Do not remove tags from frames forwarded to
PHY2.
PHY2_AUTOMDIX_ENABLED Numeric 1 Specifies whether Auto-MDIX is enabled on PHY2.
Assign one of the following values:
• 0: Auto-MDIX will be disabled on PHY2.
• 1: Auto-MDIX will be enabled on PHY2.
ASSUME_SP_POE Numeric 0 Specifies whether Single port PoE injector is
connected to the device. Assign one of the following
values:
• 0: Single port PoE injector is not connected to the
device.
• 1: Single port PoE injector is connected to the
device.
SP_POE_POWER Numeric 20 Specifies how much power is provided when the
device is connected to Single port PoE injector. The
range is from 16 to 25.
QoS parameters
Parameter
Type Default
value
Description
L2QAUD Numeric 6 Specifies the layer 2 audio priority value. The range
is from 0 to 7.
L2QVID Numeric 5 Specifies layer 2 video priority value. The range is
from 0 to 7.
L2QSIG Numeric 6 Specifies the layer 2 signaling priority value. The
range is from 0 to 7.
DSCPAUD Numeric 46 Specifies the differentiated Services Code Point for
audio. The range is from 0 to 63.
DSCPSIG Numeric 34 Specifies the differentiated Services Code Point for
signaling. The range is from 0 to 63.
DSCPVID Numeric 34 Specifies the differentiated Services Code Point for
video. The range is from 0 to 63.
Network parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 61
Comments on this document? infodev@avaya.com