Parameter Type Default
value
Description
defines the action taken by the device. Assign one of
the following values:
• 0: Auto Confirm. When a watcher list is received
containing ‘pending’ watchers, the phone will
automatically PUBLISH an approval to allow
immediate presence monitoring.
• 1: Ignore. The device will not take any action on
‘pending’ watchers.
DND_SAC_LINK Integer 0 Specifies the link between the DND and SAC
buttons. The value of this parameter is used if the
ALLOW_DND_SAC_LINK_CHANGE is set to 0.
Assign one of the following values:
• 0: The behavior of DND and SAC is not linked
• 1: The behavior of DND and SAC is linked
ALLOW_DND_SAC_LINK_CH
ANGE
Integer 0 Specifies whether the user can control the link
between Send All Calls (SAC) and Do not Disturb
(DND) behaviors. If the features are linked, the
deskphone activates SAC when user activates DND.
A value of 1 indicates that the user gets the control
to link the SAC and DND behaviors. Accordingly, the
deskphone displays the appropriate menu to set the
link. A value of 0 indicates that the user does not get
the control to link the SAC and DND behaviors.
Assign one of the following values:
• 0: Does not change the default behavior.
• 1: Change default behavior, parameter will be
included in the "A" menu.
DND_SAC_LINK_MANUAL Integer 1 Specifies the link between the DND and SAC
buttons. The value of this parameter is used if the
ALLOW_DND_SAC_LINK_CHANGE is set to 0.
Assign one of the following values:
• 0: Enabling DND will not enable SAC
• 1: Enabling DND will enable SAC
Configuration through the settings file
64 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
