Configuring visual alerts
When the Visual Alerting option is turned on, incoming calls cause the LED in the top right
corner of the phone to flash. You can turn Visual Alerting on or off.
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Visual Alerting.
7. Press Change or OK to turn Visual Alerting on or off.
8. Press Save.
Setting the audio path
You can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call. If your system administrator has set up auto-answer, incoming calls are also
answered on the default audio path you designate here. This setting also determines whether
the Voice Dialing feature gets its input from the Speaker or the Headset.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Audio Path.
7. Press Change or OK to change the Speaker or Headset setting.
Avaya Menu
16 Avaya one-X
™
Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide November 2009
To Next Page
Loading...
