The 4620 Telephone Page 16
4620 User’s Guide Page 16
IP Office 40DHB0002USEP - Issue 1 (4th November 2003)
Display Language Selection
Non-English speaking users can change the user interface language
displayed on their 4620 IP Telephones. This language selection feature is
accessible via the Options button.
Language options are:
• English (the default display language)
• Français
• Italiano
• Japanese
• Español
• Deutsche
• Nederlands
• Português
To select a language:
1. Select Select display language on the second Options Main
screen. The Language Selection screen displays.
2. Select the
corresponding to the language you want your
phone to display when in use.
• If the currently active language is selected, the second
Options Main screen re-displays and no action is taken.
• If any language other than the currently active language is
selected, the Language Confirmation screen displays
prompting “Are you sure?” in the currently active language
and in the new language you selected.
• The four
at the bottom of the display are labeled
respectively, Yes and No in both the currently active
language and the selected new language.
3. Choose Yes or No in either language.
• Yes selection: The active language changes to the new
language you selected. The second Options Main screen re-
displays. All screens now display the new user interface
language.
•
No selection: The language remains unchanged and the
language selection screen redisplays.
Repeat the procedure from Step 2 to select a different language, or select
Return to return to the second Options Main screen.
To Next Page
Loading...
