Avaya 9620 - Fwuon - Forward Unconditional on; Fwdno - Forward Number; Fwdh+ - Forward Hunt Group Calls on; Grppg - Group Paging

The 4620 Telephone Page 30
4620 User’s Guide Page 30
IP Office 40DHB0002USEP - Issue 1 (4th November 2003)
FwUOn - Forward Unconditional On
Switches the extension to forward all its calls except hunt group calls.
Pressing
FwUOn toggles the extension's forward on busy state. When
on, FwUOn is shown on a dark background and the top line of the display
includes a D. When on, calls are forwarded to the extension's forward
number.
Press
FwUOn again to switch off, shown on the default screen
background.
FwdNo - Forward Number
Sets the extension's forwarding number for use when forwarding all calls.
This feature requires the target number to be entered when programmed.
The number set is shown next to FwdNo.
Pressing FwdNo set the extension's forwarding number to that
specified by the key pressed.
FwdH+ - Forward Hunt Group Calls On
Switches the extension to forward hunt group calls it receives. Note: Calls
are only forwarded when forward unconditional is also on.
Pressing
FwdH+ toggles the feature on/off. When on, FwdH+ is shown
on a dark background. When off, FwdH+ is shown on the default screen
background.
GrpPg - Group Paging
This function requires entry of a target extension or group number when
programmed. The
GrpPg key displays that number.
When
GrpPg is pressed, it will make a paging call to that number.
HfAns - Internal Auto-Answer
Answers internal calls after a single ring.
The
HfAns key toggles internal auto-answer on/off. When on, HfAns is
shown on a dark background. When off, HfAns is shown on the default
screen background.
HdSet - Headset Toggle
The programmed key will switch the phone between handset and headset
operation. When on, HdSet is shown on a dark background. When off,
HdSet is shown on the default screen background.
There is no linkage between a programmed HdSet key and the phone's
HEADSET key.
Here- - Follow Me Here Cancel
If another extension has follow me set to this extension, switch off the
follow me action.
This function requires the original target extension to be entered when
programmed. The extension number is then shown next to Here-.
Pressing
Here- cancels the use of follow me at the target extension