The 4620 Telephone Page 32
4620 User’s Guide Page 32
IP Office 40DHB0002USEP - Issue 1 (4th November 2003)
HoldCW - Hold Call Waiting
Places the current call on hold and connects any call waiting.
Pressing
HoldCW places the current call on hold and connects a
waiting call without any the phone ringing.
IAuto - Automatic Intercom
Connects call to the extension without ringing.
This function requires entry of an extension number when programmed.
The target extension must support handsfree operation.
Press
IAuto connects the call without any ringing at the remote
extension. If the target extension is busy or not available, the call will follow
any forwarding or diversion to voicemail set.
IDial - Dial Intercom
Functions in the same manner as IAuto - Automatic Intercom.
Intru - Call Intrude
Intrudes on a call in progress at the target extension, creating a conference
between the callers and the intruding extension.
This function requires entry of the target extension number when
programmed. The
Intru key shows the target extension number.
Note: The System Administrator must also configure the intruding extension
as being able to intrude. Additionally, none of the other extensions already
in the call can have "Cannot be intruded on" status.
Login - Extn Login
Logs in a new user at the extension.
Once the function key is programmed, pressing Login will allow a new user
to log onto the phone. Press # (hash) after entering the extension number
and press # (hash) again to accept a blank password.
Logof - Extn Logout
Logs the current user off the extension.
Pressing
Logof logs the current user off the extension. A new user
must then log on to use the extension or dial *36 to re-associate the
extension with its default user.
Music - Hold Music
Plays the telephone system's music on hold.
Pressing
Music plays the telephone system's music on hold through
the extension. Once the Music function key has been programmed, the
user must get a dial tone before pressing Music.
To Next Page
Loading...
