The 4620 Telephone Page 34
4620 User’s Guide Page 34
IP Office 40DHB0002USEP - Issue 1 (4th November 2003)
Recor - Call Record
Records the current call at the specified target extension.
This function requires entry of a target extension number when
programmed.
When
Recor is pressed, the target extensions current call is recorded
into their voicemail mailbox.
Note: This function requires Voicemail Pro to be installed. If advice of call
recording is enabled, the call parties will hear a warning before the
recording takes place. In some locations, it may be a requirement to advise
callers that calls may be recorded.
RngOf - Ringer Off
The programmed RngOf key toggles the phones call ringer on/off.
When off, RngOf is shown on a dark background. When on, RngOf is
shown on the default screen background.
Relay - Relay Pulse
Pulse the specified external output relay (1 or 2) on for 5 seconds.
Pressing
Relay switches the specified relay on for 5 seconds and then
off.
This function requires the relay switch (1 or 2) on the telephone system to
be entered when programmed.
Rely+ - Relay On
Used for controlling electronic release equipments, such as door releases.
Switches the specified external output relay (1 or 2) on.
This function requires the relay switch (1 or 2) on the telephone system to
be entered when programmed.
Rely- - Relay Off
Switches the specified external output relay (1 or 2) off.
This function requires the relay switch (1 or 2) on the telephone system to
be entered when programmed.
SAC - Send All Calls
Switch do not disturb on off.
The
SAC key switches "do not disturb" on/off. When on, SAC is shown
on a dark background and the top line of the display includes an N (No
calls). When off, SAC is shown on the default screen background.
When SAC is on, callers receive busy tone or are diverted to voicemail. For
each user, the System Administrator can set which numbers can still call
when SAC is on. If the extension user has Phone Manager, they can set
those numbers themselves.
To Next Page
Loading...
