The 4620 Telephone Page 41
4620 User’s Guide Page 41
IP Office 40DHB0002USEP - Issue 1 (4th November 2003)
Power Cycling Your Phone
Use the power cycle with your System Administrator’s approval only if the
basic or programmed reset procedure cannot be performed or does not
correct the problem:
1. Unplug the phone and plug it back in.
• The phone connection is re-established.
2. If power-cycling does not correct the problem, your System
Administrator can perform a more severe power cycle routine by
unplugging both the phone and the Ethernet cables.
WARNING: Because the type of power cycle mentioned in Step 2 involves
re-programming certain values, it should only be performed by your
System Administrator.
To Next Page
Loading...
