163
Customizing your telephone
Viewing/changing IP settings
Registering a CTI application*
To be able to control your telephone using a CTI application (e.g. Avaya Com4Tel),
the CTI application must first be registered:
Press the M
ENU key.
Scroll to the Settings menu item.
Confirm selection.
Scroll to the Security menu item.
Confirm selection.
Scroll to the CTI application menu item.
Confirm selection.
Scroll to the Login mode menu item.
Confirm selection.
... Enter the PIN.
Press the "Save" softkey.
The login mode is now activated for 1 minute. You must start the CTI application
(e.g. Avaya Com4Tel) on the PC during this time. After successful registration, login
mode is immediately ended and the message "CTI application registered" is
displayed.
• If you wish to register a CTI application on a different PC on your telephone,
you must first select "Delete registration" in the "CTI application" menu and
enter the PIN. You can then register the CTI application on the other PC under
"Login mode" (see procedure above).
To Next Page
Loading...
