50
Telephoning as usual
Making several connections
Ending a multiple conference
The conference controller can end the multiple conference as follows:
Replace the handset.
The controller's connection is disconnected. The conference continues without a
controller at the expense of the original controller. The telephone returns to the idle
state.
Pressing the "Drop" softkey disconnects all connections, ending the multiple
conference. Dialing a new number may be possible, depending on the local setting.
Passive conference participants
The passive conference participant is added to the multiple conference by the
conference controller. The header of the passive conference participant's display
indicates "Conference."
The passive conference participant can:
• Not set up any more conferences.
• Place his connection in the queue (wait status) via refer-back and then switch
back to the conference.
• Transfer his conference connection to another subscriber via refer-back.
• End his participation in the conference.
• Only the conference controller can see the conference participants in the list of
all conference users (
↑
46).
To Next Page
Loading...
