51
Telephoning as usual
Making several connections
Passive conference participants – refer-back
The passive participant in a multiple conference can place his participation in the
queue (wait status) using "refer-back". The controller is made aware of this. In
addition, the passive participant can also bring another participant into the
conference in his place. This is indicated to the conference controller in the list of all
conference users.
Press the "Refer-back" softkey.
... Enter the number of the new conference participant. You can transfer
the conference once you are connected to this subscriber.
The "Refer-back" key is locked for passive participants in a three-way conference.
Passive conference participants – Ending participation
The passive participant in a multiple conference can end participation as follows:
Replace the handset. The participant is disconnected from the conference The
telephone returns to the idle state.
or
Press the "Drop" softkey. The participant is disconnected from the conference
Dialing a new number may be possible, depending on the local setting.
To Next Page
Loading...
