Avaya Aura J159 - Setting Headset MIC Level; Configuring Hearing Aid Compatibility

Setting headset mic level
About this task
Use this procedure to adjust the best headset performance.
Before you begin
• Ensure that you are on a call and the caller’s audio level is at 50%.
• Adjust the microphone position as recommended by your headset vendor.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset mic level, and press Select.
5. Press one of the following:
• Right arrow key: To increase the gain level.
• Left arrow key: To decrease the gain level.
6. (Optional) To set the default gain level, press Default.
Configuring hearing aid compatibility
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Handset profile, and press Select.
5. Press one of the following:
• Default
• Normal
• Amplified: Magnifies the normal audio level. The option must be used with caution
because long term extended use of the highest volume settings can cause ear damage.
Note:
The amplified audio level will return to normal when the call is ended.
• Hearing Aid: Optimizes the sound quality of hearing aids.
6. Press Save.
Customization
April 2021 Using Avaya J159 SIP IP Phone in Avaya Aura
®
118
Comments on this document? infodev@avaya.com