Step Description Check
2 Unpack the server, and ensure you have all the items you need
(see Unpacking the 1006r server on page 27).
Complete the following checklists that are provided in the
Installation and Configuration Task List (NN44200-306):
• "CallPilot software media and documentation checklist"
• "CallPilot server hardware checklist"
3 Place the 1006r server in the chosen location (see Installing the
server on page 29).
4 Connect the 1006r server and devices as follows:
Connect the monitor, keyboard, and mouse (see Connecting
peripherals to the server on page 32).
Connect the modem (see To connect the modem to the
server on page 33).
Note:
If you are connecting the optional Avaya server subnet, do
not power up unless your antivirus programs and Avaya
security updates are installed first.
Connect the 1006r server to the Avaya server subnet Ethernet
switch or hub (optional) (see Connecting the server to the
Avaya server subnet (optional) on page 34).
Install the software feature dongle (see Installing the Avaya
software feature dongle on page 35).
Connect the power cords for all devices, and then power them
up.
5 Start the 1006r server (see To start the server on page 42).
Conventions for warnings
You could encounter the following types of warnings in this guide. Do not ignore them.
Voltage:
Risk of electric shock
Warns you of an immediate electrical hazard which, if not avoided, can result in shock,
serious injury, or death.
Preparing for installation
26 Avaya CallPilot® 1006r Server Hardware Installation December 2010
To Next Page
Loading...
