4. Perform the following actions to install toolless rails (Threaded Hole Racks):
Task order Task
1 Remove the pins from the front and rear mounting brackets using a flat-tipped
screwdriver.
2 Pull and rotate the rail latch subassemblies to remove them from the mounting
brackets.
3 Attach the left and right mounting rails to the front vertical rack flanges using two
pairs of screws.
4 Slide the left and right back brackets forward against the rear vertical rack flanges
and attach them using two pairs of screws.
Installing the server
October 2019 Installing the Avaya Converged Platform 130 Series 25
Comments on this document? infodev@avaya.com
To Next Page
Loading...
