Note:
A region-specific power cable is shipped separately from the server package based on what
was entered in the Configurator Tool.
Before you begin
Ensure the system has been installed and secured before you attach cables. Ensure you have
take precautions against electrostatic discharge before you begin. See the following sections for
more information:
• Installing the server on page 22
• Electrostatic discharge on page 20
Procedure
1. Connect the system to the appropriate power source.
2. Loop and secure the power cable using the retention strap.
3. Attach USB keyboard and VGA monitor to system before powering up.
4. Power on the system.
The following image shows the location of the power button.
Installation
October 2019 Installing the Avaya Converged Platform 130 Series 28
Comments on this document? infodev@avaya.com
To Next Page
Loading...
