Avaya Converged Platform 130 Series - Page 73

d. Scroll down and select Fast Default Initialization.
The following is an example of configuring the virtual disk parameters:
4. On the
Create Virtual Disk screen, click Select Physical Disks.
5. Under Choose Unconfigured Physical Disks, select all the unconfigured physical disks
for the Avaya Converged Platform profile configuration, as mentioned in step 3.
The following is an example with 4 physical disks selected.
6. Click Apply Changes, then click OK.
7. Check that the virtual disk size is approximately of the expected size as shown in Virtual
disk size on page 74.
Dell USB R640 RAID Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 73
Comments on this document? infodev@avaya.com