15. Once pasted the ID, confirm that you are not a robot and press “Register”. Your CU will
now be enlisted as a registered device for your account. You can register an unlimited
number of CU360 devices under your account.
16. Click on the overlay message to reboot the device. If the overlay message does not
appear, please reboot the device manually.
17. You now need to complete the procedure by launching the Google Play Store on the
device with a valid account, as specified in Launch Google Play Store™.
Setup AppsProvider/Google Play Store™ via Web
The same steps of installing the Google Play Store/Google Services Framework on the device and
registering the device to Google can be done also remotely accessing to the web interface of the
device using a web browser.
1. Login by Web (Admin/1234) to the IP address of your device.
[WEB] >BASIC SETTINGS > APPSPROVIDER/GOOGLE PLAY STORE
To Next Page
Loading...
