Camera Tracking Modes
The CU360 camera tracking feature helps directing the meeting in intelligent way, focusing on the
active speaker in the room (Track Speaker) or automatically framing a group of people in the room
(Auto Framing, also called Group Framing ).
The embedded HD camera can be configured to work in two different “Tracking Modes” when the
CU360 App is in foreground or in overlay (while in a call) and no other app is using the camera.
In the CU360 App, you can press the “Enable/Disable tracking camera” key on the remote-control
to toggle on/off the current tracking mode functionality of the camera on the fly (default is off,
Track Speaker).
For other apps, only the “Track Speaker” Mode can be activated or deactivated on the fly
using the remote-control (Enable/Disable tracking camera key on the remote-control, “chat
balloon” icon).
Figure 1: Enable/Disable Tracking Key on the Remote-control
The default mode for the CU360 application can be changed at
[GUI] CONFIGURE > ADVANCED > I/O CONNECTIONS>CAMERAS > HD1 >
[WEB] [ADMIN LOGIN] ADMINISTRATOR SETTINGS> I/O CONNECTIONS>CAMERAS > HD1 >
• Tracking: No*/Yes; toggle on/off the tracking mode functionality of the camera at the start-
up of the CU360 App. The tracking can be toggled on-the-fly using the remote-control key
below (chat icon).
When tracking is active, an icon is visible on the top info bar of the CU360 application.
If the CU360 app is in background, an icon is visible in the overlay window as below.
To Next Page
Loading...
