Figure 11: Web > More Actions >Cameras Control
You can see the enabled preset in the page, edit or delete presets or store new presets.
You can also choose a default preset. The default preset will be recalled automatically every time
the system restarts.
Figure 12: Web > Cameras Control Presets
From the web interface only, you can store and recall up to 122 presets.
Pan-Tilt-Zoom for Any App
You can also Pan-Tilt-Zoom the embedded HD camera with the CU360 remote-control when a
generic application is using it.
To Zoom in/out the camera, press the Zoom +/- keys on the remote-control.
To Pan-Tilt the camera, once the camera is zoomed in activate the mouse pointer on the remote-
control, and keeping the “Toggle near/far camera” key pressed, move the mouse pointer
up/down/left/right to force the corresponding movements of the camera.
Figure 13: Activate the Mouse and Keep Pressed Control Far/Near Camera Key to Pan and Tilt
Any third-party app displaying the camera will benefit of this feature.
To Next Page
Loading...
