While the USB Bar Mode is active, the CU360 remote-control can be used to zoom/in out the
camera, and to PAN/TILT or activate the speaker tracking.
- To zoom in/out, use the zoom keys
- To pan/tilt, first use the zoom-in key, then activate the air pointer on the
remote-control, and drag the video image while pressing the key.
- To toggle speaker tracking feature can be toggled via the key
(when speaker tracking is active, ePTZ is disabled).
To mute the CU360, use the functionalities of the application on the computer
To change CU360 speakers’ volume, you can use both the computer volume controls and the
CU360 volume keys on the remote-control. If you cannot hear audio out of the CU360 (embedded
speakers or audio peripherals) please check both computer volume and CU360/peripherals
volume.
You can test the audio volume on the CU360 before activating USB Bar mode in this way:
[GUI]CONFIGURE> SYSTEM STATUS>DIAGNOSTICS>I/O CONNECTIONS>AUDIO>TESTS> LOCAL TONE
Increase the audio volume using CU360 remote-control, and also check volume on connected
audio peripherals (HDMI TV with own audio level, BT/USB audio devices).
To Next Page
Loading...
