Figure 106: Chose the CU360 device to connect to
• Important
• You can control some source Android device with a mouse connected to your CU.
• A keyboard connected with the CU can be used with some Android source devices.
• DRM Protected video content cannot be sent from mobile to CU360.
Local Presentation Mode
When connecting a computer to the CU360 app to the AV Grabber, or when activating a screen
link connection, if not in a call the app will automatically show the computer content in local
presentation mode.
• You can disable the automatic local presentation mode in
[WEB] [ADMIN LOGIN] ADMINISTRATOR SETTINGS> PRESENTATION>LOCAL PRESENTATION MODE
[GUI] CONFIGURE > ADVANCED > LOCAL PRESENTATION MODE
ScreenLink connections and AV grabber can be used simultaneously, with the following rules:
• If a screen link presentation is active when the AV Grabber is plugged in the CU 360 (or a
computer input is plugged in the grabber), the screen link connection will be automatically
terminated.
• If a screen link connection is started when the CU app is in local presentation mode via AV
grabber, the screen link will fail.
• If a screen link connection is initiated when the AV grabber is connected but not displayed
as presentation, the screen link source will be used in local presentation mode. To
disconnect the screen link and display the USB, press More > Unpair screen link or
reconnect the computer to the AV grabber.
To Next Page
Loading...
