Avaya CU360 - Configuring Avaya Room Camera RC100 as USB camera for Avaya CU360

• Control Camera: Yes
• Configure the following default parameters for Avaya Room Camera RC100:
- Username: admin
- Password: 123456
- Port: 80
The parameters for controlling the camera are different from the parameters to connect to
the camera through the URL.
Use the remote control to view the IP address of Avaya Room Camera RC100 from the
Network section.
5. On the web interface, click Save.
Related links
Avaya CU360 supports Avaya Room Camera RC100 on page 31
Configuring Avaya Room Camera RC100 as USB camera
for
Avaya CU360
About this task
You can use Avaya Room Camera RC100 as a USB camera on Avaya CU360.
Use the USB camera with excellent video quality and a maximum resolution of 720p@30fps as an
additional live camera in the
Avaya CU360 application.
Note:
If the camera uses both the USB and ethernet interfaces simultaneously, the stream sent over
the ethernet and USB have the same resolutions.
Configuring Avaya Room Camera RC100 as USB camera for Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 103
Comments on this document? infodev@avaya.com