For Avaya Tracking Camera TC220, default username is admin, default password is
empty:
rtsp://admin:@x.y.z.w/ch1
• Control Camera: Yes
The default values for the control protocol are:
• Username: admin
• Password: 123456
• Port: 80
To customize the password for streaming, and control the streaming using the Avaya
Tracking Camera TC220 remote control, enter System > Network Permission.
The default values are:
• IP STREAM ID: admin
• IP STREAM PW:
Leave the field empty as default password.
• IP CONTROL ID: admin
• IP CONTROL PW: 123456
5. On the web interface, click Save.
6. To control the PTZ option from the Avaya CU360 endpoint through IP, you need to disable
the tracking mode on the Avaya Tracking Camera TC220. Using the Avaya Tracking
Camera TC220 remote control, enter System > MoreParam > Tracking > On/Off.
Related links
Avaya CU360 supports Avaya Tracking Camera TC220 on page 31
Configuring Avaya Tracking Camera TC220 as USB
camera for Avaya CU360
About this task
You can use Avaya Tracking Camera TC220 as a USB camera on Avaya CU360.
Avaya AV Grabber is an optional cable kit for Avaya Tracking Camera TC220. The order part
number is 700513898.
Avaya CU360 does not support audio from USB camera.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 106
Comments on this document? infodev@avaya.com
To Next Page
Loading...
