Anyway the full control of the camera (Pan/Tilt/Zoom) is available with the TC220 remote
control.
5. On the web interface, click Save.
Note:
When the Control Camera option is enabled (camera used for live video), the
presentation through USB (with
Avaya AV Grabber) is not available in Avaya CU360.
To switch back to the presentation input through USB, set the Control Camera to No
and restart the Avaya CU360 endpoint.
Related links
Avaya CU360 supports Avaya Tracking Camera TC220 on page 31
Configuring the Avaya CU360 camera background
About this task
Avaya CU360 camera includes Artificial Intelligence-based algorithms that allow users to activate
a virtual background for the currently selected camera or blur the real background of the camera.
Avaya CU360 camera uses Artificial Intelligence-based algorithms that enable body recognition.
The algorithm recognizes people sitting in front of the
Avaya CU360 endpoint and blurs the image
background. Users can also replace the background with a customizable picture. The virtual
background works on camera speaker-tracking or group framing functionalities.
The layout key on the remote control helps users to activate the virtual background for third-party
applications or when in USB Bar Mode.
Procedure
1. Do the following:
• On the endpoint main menu, click Control Camera > OK.
• On the web interface, click More Options.
2. Select Virtual Background.
Result
Avaya CU360 displays the virtual background during the meeting.
Customizing virtual background image in Avaya CU360
About this task
Configure Avaya CU360 to change the virtual background image of the camera.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 108
Comments on this document? infodev@avaya.com
To Next Page
Loading...
