2. Click Create.
Avaya CU360 displays a link to download the Customer Support Package.
Configuring audio on an HDMI monitor or built-in speakers
for Avaya CU360
About this task
When the Avaya CU360 endpoint connects to an HDMI monitor, users can choose the audio
output from the speakers of the HDMI monitor by default or the
Avaya CU360 built-in speakers.
Configure Avaya CU360 to use the feature when an HDMI monitor requires external speakers or
headsets to hear the audio.
The audio routing policy of the Avaya CU360 endpoint automatically selects microphones and
speakers in the following order:
• USB connected speakerphone
• Bluetooth connected speakerphone
• Built-in microphones of the Avaya CU360 endpoint or speakers of the HDMI monitor, if an
HDMI monitor is connected.
• Built-in microphones or speakers of the Avaya CU360 endpoint, if a DVI monitor is
connected, or there is no monitor.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Do one of the following:
• On the endpoint main menu, click I/O Connections > Audio Outputs > Audio on HD
Monitor
• On the web interface, click I/O Connections > Audio Outputs > General > Audio on
HD Monitor
4. Select Yes to enable the audio.
5. On the web interface, click Save.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 112
Comments on this document? infodev@avaya.com
To Next Page
Loading...
