Avaya CU360 - Chapter 5: Advance administration; Configuring date and time in Avaya CU360

Chapter 5: Advance administration
Configuring date and time in Avaya CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click System > Date & Time > General.
4. Configure the following fields:
• Day
• Month
• Year
• Time Format
• Hour
• AM/PM
• Minutes
• Internet Time
• Use Default NTP Servers
• Server 1
• Server 2
• Refresh Time (min.)
October 2022 Installing and Administering Avaya Collaboration Unit CU360 114
Comments on this document? infodev@avaya.com