Avaya CU360 - System Name field descriptions

If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click System > Location.
4. Configure the following settings:
• System Name
• System Name Unicode: This option is available only on the web interface.
• System Name Display Mode
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
System Name field descriptions
Name Description
System Name The name of the Avaya CU360 endpoint.
This field displays the initial name you entered during the manual setup.
System Name Unicode The name of the Avaya CU360 endpoint with non-alphanumeric
characters.
For example, Chinese or Japanese letters.
System Name Display Mode The title bar of the Avaya CU360 endpoint displays the system name
based on the mode that you select.
The options are:
• Automatic: Automatically displays the name based on deployment.
• System Name Unicode: Displays the name in System Name
Unicode.
• SIP: Displays the SIP username.
• H.323: Displays the H.323 name.
• System Name: Displays the name that you entered in System Name.
System Name field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 117
Comments on this document? infodev@avaya.com