Configuring advanced regional audio and video settings in
Avaya CU360
About this task
After you set the country and language of Avaya CU360 in the quick setup wizard, Avaya CU360
defaults to the audio and video standards of that country.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click System > Location.
4. Configure the following fields:
• Country
• Language
• Audio Coding
• Video Frequency
• International Call Prefix (IDD)
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 118
Comments on this document? infodev@avaya.com
To Next Page
Loading...
