Avaya CU360 - Hiding the call rate selection list in Avaya CU360; Disabling the Avaya CU360 startup tone

Hiding the call rate selection list in Avaya CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click System > Customization.
4. Select Yes for Hide Call Rate In Advanced Calling.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Disabling the Avaya CU360 startup tone
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the
Advanced window.
3. Click System > Customization.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 124
Comments on this document? infodev@avaya.com