Preferences General field descriptions
IP section
Name Description
Rate (K) The maximum bitrate used for a single point-to-point call.
Audio Coding The preferred audio codec that Avaya CU360 tries to send.
Video Coding The preferred video codec that Avaya CU360 tries to send.
Dual Video Coding The preferred video codec that Avaya CU360 tries to send as
presentation content.
Use Manual Dual Video
Bandwidth
The option allows to change the bandwidth for presentation content and
live video.
Dual Video/Live Bandwidth The bandwidth of live video or presentation content video.
ISDN section
Name Description
Rate (K) The maximum call rate that Avaya CU360 uses for ISDN call.
Setting a time limit for Avaya CU360 video conferences
About this task
Set a time limit for video conferences to alert users that the time allocated for the meeting is about
to end and also to end video conferences that participants did not end.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Preferences > General.
4. Select the Call Time Limit from the drop-down list.
The default time limit is Unlimited. The maximum limit you can configure is 24 hours.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 130
Comments on this document? infodev@avaya.com
To Next Page
Loading...
