If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Preferences > IP.
4. Configure the following fields:
• SIP DTMF
• H.323 DTMF RFC2833
• H.323 DTMF H.245 UII
• Use H.323 Generic Vendor Code
• Dialing Number Format Mode
• Separator
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
IP field descriptions
Name
Description
SIP DTMF The option to send DTMF audio tones in the RTP stream for SIP calls.
This is the default option.
H.323 DTMF RFC2833 The option to send DTMF audio tones in the RTP stream for H.323–
based calls.
H.323 DTMF H.245 UII The option to enable or disable the out-of-band DTMF transmissions in
H.323–based calls.
Use H.323 Generic Vendor
Code
The option to enable the H.323 application uses a generic vendor code
identity instead of its default vendor code. So, the remote H.323 devices
do not recognize it as an Avaya endpoint.
Dialing Number Format
Mode
The dial number format of the H.323 or SIP gatekeeper.
You can use any of the following valid formats:
• <gatekeeper number><separator><extension of the called
endpoint>
• <extension><separator><number>
Separator The option is used when dialing to the gatekeeper. The default separator
is the pound sign (##).
IP field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 133
Comments on this document? infodev@avaya.com
To Next Page
Loading...
