Enabling the RTP firewall in Avaya CU360
About this task
Configure Avaya CU360 to check the source of the received audio, video, and presentation (RTP
packets) to verify that the source matches the remote endpoint’s IP address.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Preferences > IP.
4. Select Yes to enable RTP Firewall.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Encryption field descriptions
Name
Description
Accept Protected Calls The option to enable or disable encryption when receiving an encrypted
call.
Table continues…
Enabling the RTP firewall in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 135
Comments on this document? infodev@avaya.com
To Next Page
Loading...
