2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Predefined Party.
4. Configure the following fields:
• Enabled
• Number
• Call Protocol
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Predefined Party field descriptions
Name
Description
Enabled The option to enable or disable the predefined party feature in Avaya
CU360.
Number The number that Avaya CU360 calls.
Call Protocol The protocol to use in calls.
The options are:
• H.323: The protocol for calls to H.323–based endpoints.
• SIP: The protocol for calls to SIP-based endpoints.
• ISDN: The protocol for calls to ISDN-based endpoints.
Configuring the Avaya CU360 gallery layout
About this task
Configure Avaya CU360 to use the gallery layout when meeting participants to present content in
video conferences. Avaya CU360 uses the gallery layout only in video conferences that support
the gallery layout.
Using this feature, Avaya CU360 endpoints can receive and change the gallery layout.
This configuration is available only if your administrator enables the advanced settings for users.
Predefined Party field descriptions
October 2022 Installing and Administering Avaya Collaboration Unit CU360 137
Comments on this document? infodev@avaya.com
To Next Page
Loading...
